Mohammad Reza Khedmati - Amirkabir University of Technology

Special services: Faculty Members Students Graduates

Content

Pepole

Amirkabir University of Technology

Resume Service

Mohammad Reza Khedmati

Professor
Department of Maritime Engineering
Structure & Construction Engineering

Download PDF فارسی

Email:

khedmati

aut.ac.ir

Phone:

021-64543113

h-index (Scopus):

23.00

Citations (Scopus):

1690

Languages

Language

Translation Skill

Dialogue Skill

English

Fluent

Supervised PhD Theses

Thesis title

Date

DEVELOPMENT OF A QUANTITATIVE RISK ANALYSIS MODEL FOR THE TRANSPORTATION AND INSTALLATION OF OFFSHORE PLATFORMS BY FLOATING METHOD

SHAHED JAFARPOUR HAMEDANI

2024 Jun

ANALYSIS OF THE ULTIMATE STRENGTH OF STEEL SHIP HULL GIRDER UNDER THE INFLUENCE OF FAILURE DUE TO IMPACT PRESSURE

HAMID MOAIERI

2021 May

ESTIMATION OF THE ULTIMATE STRENGTH OF SHIPS STRUCTURE TAKING INTO ACCOUNT THE EFFECT OF CRACKING

ASHKAN BABAZADEH

2019 Oct

UPGRADING THE FINITE ELEMENT MODEL OF STRUCTURES USING THE RESPONSE POWER DENSITY SPECTRUM

MASOUD PEDRAM & AKBAR ESFANDIARI

2017 May

QUANTIFICATION OF UNCERTAINTY IN THE DYNAMIC RESPONSE OF DISCONTINUOUS MODELS OF MARITIME STRUCTURES BY COMPARISON WITH CHAOS POLYNOMIALS

EHSAN BAHMYARI

2017 Apr

INVESTIGATION OF THE GENERAL LOADS ACTING ON A MULTIHULL VESSEL AND EVALUATION OF ITS ULTIMATE STRENGTH IN DIFFERENT DAMAGED CONDITIONS

KARIM AKBARI VAKIL ABADI

2014 Dec

ULTIMATE STRENGTH OF COMPOSITE SHIPS CONSIDERING THE EFFECT OF SUPERSTRUCTURE

FATTANEH MORSHEDSOLOUK

2013 Oct

VIBRATION ANALYSIS OF STIFFENED SHELLS HAVING PARABOLIC CURVATURE WITH APPLICATION TO SHIP STRUCTURES

PEDRAM EDALAT

2013 Jun

EFFECT OF CORROSION ON THE ULTIMATE STRENGTH OF AGED SHIPS

ZORAREH NOURI

2011 Sep

Supervised MSc Theses

Thesis title

Date

Investigation of structural strength of a 2500 DWT Landing craft for carrying container on deck

ABOLFAZL KARIMI

2024 Sep

Numerical analysis of response of stiffened aluminium plates considering changes in framing system (fixed, floating or combined) subject to single slamming

MOHAMMAD SADEGH SOLEYMANI

2024 Sep

Numerical assessment of strength of offshore fixed jacket platform structure considering corrosion and soli-structure interaction after alternative ship impacts

ALI QASEMIAN SAHEBI

2024 Sep

Evaluation of the effect of polyurethane protective layer on mitigation of consequences of blast and impact on un-stiffened steel plates

MAHDI ALVANDI SEDEHI

2024 Jun

Numerical analysis of response of foam-core sandwich composite panels subject to repeated slamming

KAMRAN KAZEMI NOORALDINVAND

2024 Jan

Structural design and analysis of foils and their joints in a hydrofoil vessel for different operating modes

SEYYED ROUHOLLAH HOSSEINI

2023 Sep

Dynamic modeling of collision between ships and offshore wind turbines using the finite element method

MAHANDOKHT MASHHADI

2023 Sep

Probabilistic evaluation of the effect of holes with random distribution and specifications on the strength of un-stiffened steel plates under uni-axial in-plane compression

SARA MOTTAGHI

2023 Jul

Study of multi-wall configurations in reducing the consequences induced by bow-to-side collisions in tanker vessels

KAZEM BAHARVAND

2023 Jul

Ultimate Strength of Container Ships under Combination of Bending and Torsion Loading

MOHAMMADAMIN SAFA

2022 Jul

Residual strength of offshore platform structure considering corrosion after alternative ship impacts

REZA ZENDEHDEL

2022 Jun

Effect of different corrosion models on ultimate strength of bulk carriers

MOHAMMAD NAFAR

2022 May

Numerical analysis of response of stiffened aluminium plates with fixed framing system subject to repeated slamming

ALI RAYZAN

2022 Apr

Residual ultimate strength analysis of ship damaged plates under uni-axial in-plane compresison

HAMIDE MOHAMMADI

2022 Jan

Simulation of welding-induced deflections in flat sub-assemblies

MORTEZA SOLTANI NEJAD

2021 Oct

investigation into effects of crack geometric parameters in tensile behavior of un-stiffened/stiffened plates(ignoring crack propagation)

MILAD KARAMI

2021 Jan

Study of zone strength of aluminium ship structure considering changes in framing system (fixed, floating or combined)

ZAHRA KOSAR

2020 Nov

investigation intothe load-carrying behaviour of sps (sandwich plate system)plates subject to inplane compression or lateral presure

SANA KOULIYAN

2020 Sep

Investigation on subsea pipelines subjected to dropped objects impact

PARSA ASASEH

2020 Sep

modelling and analysis of ship bottom structure when launching on airbags

FATEMEH BARANI

2020 Feb

Ultimate strength of ships under combined bending considering corrosion damage

HOSSEIN RAHBARIMANESH

2019 Dec

Numerical simulation of line heating method for forming of aluminium plates

MEHDI NAJAFI

2019 Sep

Numerical analysis of the effect of shear in the ship cross-section on its ultimate strength under

MEHDI ASKARI

2019 Jul

Experimental investigation into strength behavior of pitted plates subject touni-axial in-plane compression

FARSHED MAHDE ALLAMDARLOO

2018 Dec

Preparation of suitable methods for the repair of damaged hull of aluminium and composite high speed crafts

ABBAS KARIMI KISOUMI

2018 Nov

Assessment of the effects of pitting corrosion on static strength of tubular joints under bending

ARNO PETROSIAN

2018 Nov

Evaluation of Ultimate Strength of Ship Hulls Girders under Combined Vertical and Horizontal Bending Moments

AZADEH CHAMKOORI

2018 Jun

Analytical study on different manufacturing methods (SKD, CKD and CBU) of lightweight vessels and identification of the application-oriented optimum method

FARSHID ALIAHMAD

2018 May

Evaluation of Initial Imperfections and corrosion Effects on the Ultimate Strength of Ship Hulls Girders

ZOHREH ADIBI POUR

2018 Feb

Assessment of static strength of tubular members with pitting corrosion under axial compressive loading

ELAHE TAVANA

2018 Feb

Investigation into the vibrational behavior of marine aluminum panel subject to repetitive slamming induced impulses

MOHAMMAD SADEGH HOSEIN POOR

2017 Oct

Assessment of buckling behavior and ultimate strength of corroded tubular members under compressive and lateral impact loads

MOHAMMAD AZIMI GHADIKOLAEI

2017 Oct

Analysis of Ship Bottom Structures When Launching on Airbags

AMIRSALAR HAGHAYEGHI

2017 Jul

Investigation into the initial imperfections in aluminum vessels and study of their effects on strength of aluminum stiffened plates

MOHSEN NOROZI POUR

2017 Jul

Study on the effect of variation in framing system (fixed, floating or combined)on the strength of high speed aluminum craft

PEDRAM POORABASI NAJAFABADI

2017 Jul

Study on ultimate strength of box girders considering different corrosion models

HAMED HELMI

2017 Jun

Behavior of Cold-Formed Beam-Column Under Cyclic Loading

OMID FASIHIZADEH

2017 Feb

Evaluation and retrofit of a refinery tower under dynamic and thermal load (modal analysis

MOHAMMAD POORIE

2017 Feb

Residual strength of an offshore platform following multiple side impacts

MOHAMMASADEGH DEHGHAN

2017 Feb

Lateral-torsional Buckling Analysis of Thin-Walled Cold-Formed Girder With Corrugated Webs Including Opening

MOHAMMAD TOLOUEI & MOHAMMAD ZAMAN KABIR

2016 Oct

strength of pitted unstiffened/stiffened plates under tension

KOMEIL BINIAZ

2016 Sep

Prediction and Control of Welding Distortion in Plate Structures

MOHAMAD MAZIDI

2016 Jul

Investigation of the effects of fabrication tolerances on the buckling strength of submarine pressure hull

ALIASGHAR REZAEI

2016 May

Numerical analysis of buckling strength and postbuckling behavior of pitted plates subject to inplane biaxial compression

SALEH LOTFI

2016 Apr

Evaluation of causes of marine casaulties related to structural and manufacturing characteristics in traditional and nontraditional ships in jurisdiction regions

HOSSEIN ZARE

2016 Mar

Derivation of Simple Equations for Estimation of Ultimate Strength of Aged Ship

NAJMEH SALEMIZADEH

2016 Feb

Experimental investigation into strength of pitted plates

GHOLAMREZA ABAD

2015 Nov

Investigation into the Behaviour of Reinforced Concrete Beams Retrofitted With Frp Fabrics subjected to Blast Loading

MEHDI SALOO & MOHAMMAD ZAMAN KABIR

2015 Oct

Experimental investigation of ultimate strength and buckling behavior of tubular members with corrosion imperfections

ARDALAN FARAZIAN SHIRAZY

2015 Sep

Preparation of a preprocessor/postprocessor code for modeling progressive collapse procedure and ultimate strength analysis of ship hulls girders

OMID FERDOWSI HOSSEIN ABADI

2015 Sep

Derivation of Empirical Formulations for Estimation of Ultimate Strength of Composite Ship Hulls

MOHSEN SARVARI

2015 Jul

Investigation into the ultimate strength of corroded box girders

MOHAMMAD MAHMOODI SALEHABAD

2015 Feb

Dynamic Stability Analysis Of Composite Plates Using Element Free Galerkin Method

AMIN ETEMAD SHOAR

2015 Feb

Structural Analysis of Ships Bottom Structure During Launching

MOHSEN DRHGHANI TAFTI

2014 Dec

Assessment of buckling behavior and ultimate strength of multiplanar tubular joints with overall scorrosion defects

MAJID RASHIDI

2014 Oct

Simulation of Aluminum Welded Joints Using Finite Element Method

HESSAM YOOSEFZADEH

2014 Oct

Buckling distortion of aluminium stiffened plates during welding

MILAD MOHAMADI

2014 Oct

Investigation into initial imperfections during construction of composite ships with VIP method and their numerical simulation

MOJTABA SHOMALI VARZANDE

2014 Oct

Assessment of deformation and behavior of stiffened corroded plates with regard to use as the gate of dry docks

MOHAMMAD AMIN KALANTARI

2014 Oct

3D Hydroelastic Investigation into the Water Impact on a Geometrically Imperfect Aluminum Panel

MOHSEN KHABIR

2014 Oct

Investigation of the effects of various pitting corrosion parameters with random distribution on the behavior of un-stiffened and stiffened plates under uni-axial in-plane compression

MOJTABA MOOSAPOOR TOOSERVANDANI

2013 Nov

Assessment of buckling behavior and ultimate strength of imperfect axially pre-stressed tubular members of offshore structures under impact loads considering different shapes of impactors and various

HASSAN FARDI

2013 Nov

Investigation into strength and performance of protective plated structures against perforation

MOSLEM ZEBARDAST

2013 Oct

Investigation into buckling and postbuckling Behavior of Sandwich Panels With Belsa or PVC core made by hand layup and Vacum bag Infusion Procedures

SAM BARATI NARDIN

2013 Oct

Experimental and numerical study of geometrical parameters effects on the strength of composite-aluminum adhesively bonded joint in pure tension

ASHKAN BABAZADEH

2013 Sep

Prediction and control of welding distortion in plate structures

SEYED ESHAGH MOUSAVI

2013 Sep

Optimization of welding-induced buckling distortion in aluminium stiffened plates

MODJTABA KABOODVANDY RAD

2013 Mar

Buckling Behavior of Stiffened Composite Plates by Nonlinear and Finite Element Methods

ABDOLLSHARIF ANBIA & MANOUCHEHR FADAVIE

2013 Feb

Determination of equivalent orthotropic parameters of parabolic stiffened curved with ship structure application.

POURIA BAHRAMI ATAABADI

2012 Nov

Global ship structural analysis with FEM method and its reliability analysis

AMIRHOSEIN HEYDARI & MEHDI IRANMANESH

2012 Nov

A Numerical Study on the Strength Behaviour of metal-composite T-joints and X-joints in high speed crafts

MAHDI OMIDALI

2012 Oct

Structural analysis of a trimaran vessel in different damaged conditions

MOHSEN MOHAMMADI

2012 Oct

Free and Forced Vibration Analysis of stiffened and Unstiffened Parabolic Curved plate

MOHAMMAD MEHDI MOBASHERI ZAFARABADI

2012 Feb

Analysis of buckling/collapse behavior of tubular members in marine platforms considering corrosion damage

AMIRFOAD KHALAJ

2012 Feb

Postbuckling and progressive failure of laminate composite plate under uni-axial compression

YOSEF AMIRIYAN

2012 Feb

Investigation into the effects of impulsive loads on the behavior of stiffened Aluminum plates considering initial imperfections

MASOUD PEDRAM

2011 Oct

Investigation into the effects of cracks on natural frequency and damping ratio in vibration of plates

ALI BEYGI HARCHEGANI

2011 Jul

Vibration Response Analysis of Stiffened Plates Under Cyclic Load:

SHAHED JAFARPOUR HAMEDANI

2011 Mar

Modeling and Evaluation of Ultimate Strength of Composite Ships Using Finite Element Method

SEPIDEH JAFAR ZADEH

2011 Feb

Investigation into Behaviour of Unstiffened/Stiffened Aluminium plate under combined bi-axial compression and lateral pressure

HAMID REZA MEMARIAN

2011 Jan

Evaluation of ultimate strength of a product carrier using finite element method

AHMADREZA RASHEDI

2010 Nov

Investigation into fatigue reliability of jacket-type platforms considering their dynamic behavior.

MOHAMMADHOSSIN VATANDOST KHALILABAD

2010 Oct

Optimization of location of shaft line bearings in alignment process considering hull deflection in different load conditions

ALIREZA KARIMAGHALOO

2010 Aug

Elastic stability of plates with linear / nonlinear variable thickness using the finite element and analytical methods

ZAHRA SHAHRABI FARAHANI

2010 Feb

Finite Element Analysis of Naval Ships Deck Structure under Lateral Blast Loads

MOHAMMAD HOSSEIN SADEGHI

2010 Jan

Elastic Buckling Analysis of Corroded Plates Using Finite Element Method

MOHAMMAD MEHDI ROSHANALI

2009 Nov

Response Analysis of Dynamically loaded curved composite sandwich panel in high speed craft

MEHDI FAKORI

2009 Nov

Optimization of composite laminates under lateral impact loads using genetic algorithms

MOHAMMAD REZAYI SANGTAYI

2009 Sep

Numerical Study on the effect of Out-of-Roundness on the Buckling Behavior and Ultimate Strength of Stiffened Circular Cylindrical Shells

MOHAMMADALI ADL

2009 Aug

Fracture and Inelastic Behavior Analysis of Aluminum Panels Repaired with Composite Patches

MAHDI MOHAMMAD SHARIFI

2009 Apr

Assessment of buckling behavior and ultimate strength of imperfect axially pre-stressed tubular members of offshore structures under impact loads

MASOOD NAZARI

2009 Jan

Finite Element Study of the Effects of Longitudinal/ Transverse Curvature on the Buckling /Ultimate Strength and Behavior of Deck Structure

PEDRAM EDALAT

2008 Sep

ANALYSING BEHAVIOR OF STIFFENED PLATE UNDER IMPACT LOADING OF SLAMMING PHENOMENA

MOJTABA GHAFARI

2008 Jan

RESPONSE ANALYSIS FOR UNSTIFFENED/STIFFENED PLATES SUBJECT TO UNDERWATER EXPLOSION HOCK

MOHAMAD VALI NATAJ BENAMIRI & Mahmoud Ghiasi

2007 Jul

ACOMPARATIVE STUDY ON BENDING, BUCKLING AND ULTIMATE STRENGTH OF ALUMINUM PLATES STIFFENED WITH FIXED AND FLOATING FRAME

KAMBIZ YAHYAZADEH

2007 Feb

NUMERICAL AND EXPERIMENTAL STUDY ON THE CRUSHING BEHAVIOUR OF ALUMINUM AND COMPOSITE HIGH SPEED CRAFT AT THE EVENT OF BO

IRAJ KAIVANFAR

2007 Jan

STRESS AND STRAIN ANALYSIS OF MARINE PROPELLERS USING FINITE ELEMENT METHOD

MUHAMMAD ALI TAFAZZOLY

2006 Sep

Buckling/Ultimate strength analysis of aluminum stiffened plates under combined in-plane longitudinal compression

MOHAMMAD REZA ZAREEI

2006 Mar

Numerical strength analysis of unstiffened/stiffened ship plates under military blast loads

MOOUD NIKFARJAM

2006 Feb

100

Study on the buckling/plastic collapse behavior and strength of stiffened circular cylindrical shells

MOHAMMAD JAVAD MAZAHERI

2005 May

101

A Benchmark Study on the Ultimate Strength Formulations for Ship Stiffened Plates

ABDOLLAH BARZEGAR BARGAHI

2005 Apr

102

Introduction and Application of ISUM Plate Element in Simulating Average Stress-Average Strain Relationships of Plates under in-plane Compression

ELAHEH KIA

2005 Apr

103

OPTIMUM DESIGN OF STIFFENED PLATES FOR BUCKLING UNDER INPLANE UNIAXIAL COMPRESSION

ABOLFAZL NAZARI

2004 Feb

104

Simulation of Average Stress-Average Strain Relationships of Continuous Plates under Combined Biaxial in-plane Compression and Lateral Pressure

OLFAT ABPLFAZLI

2003 Nov

105

Study on the Elastic Local Buckling Strength of Stiffened Plates considering Plate/Stiffener Interaction and Lateral Pressure Effects

EAETEMAD AL DEEN RABEAE GHOLAMI

2003 Feb

106

Study on Buckling, Post-buckling, Plastic Collapse and Post-collapse Behaviour of Continuous Stiffened Plates Subjected to Combined In-plane Compressive Stresses and Lateral Pressure

HASSAN GHAZVINI

2002 Nov

107

Buckling Strength of Perforated Plates

MOHAMMAD JAVAD KHASHAN

2002 Sep

108

STRENGTH ASSESSMENT OF CONTINUOUS PLATES WITH INITIAL IMPERFECTIONS UNDER COMBINED INPLANE COMPRESSION AND LATERAL PRESSURE

AMIR ABBAS SHAFIEI ARDESTANI

2002 Jun

109

Comparative analysis of classification societies' rules for scantlings of special ships

SEYEDDAVOOD ZARGHAMI

2025 Sep

110

Response analysis of ship bow structure under slamming pressure

DANIYAL ESMAEILIROSHANAAVAND

2025 Sep

111

Residual Strength Assessment of damaged ships

MOHAMMADSALEH SOLEIMANIZADEH

2025 Oct

112

Assessmnet of structural strength of floating offshore wind turbines in extreme weather conditions

MOHAMMAD GHOTLOUEE

2025 Apr

Books

Title

Author(s)

Publisher country

publication date

version

SHIP INTRODUCTION

Khedmati Mohammad Reza

Iran

Corrosion of Aluminium

Khedmati Mohammad Reza ، Ebrahim Soleimani ، Esmaeeil Zavvar

Iran

SHIP INTRODUCTION

Khedmati Mohammad Reza

Iran

Design of Ship Hull Structures-Vol_1: Fundamentals and Theory

Khedmati Mohammad Reza

Iran

Design of Ship Hull Structures-Vol_2: Applications

Khedmati Mohammad Reza

Iran

Design of Ship Hull Structures-Vol_1: Fundamentals and Theory

Khedmati Mohammad Reza

Iran

Design of Ship Hull Structures-Vol_2: Applications

Khedmati Mohammad Reza

Iran

Nonlinear Large Deflection Analysis of Stiffened Plates

Khosrow Ghavami ، Khedmati Mohammad Reza

Croatia

Design and Performance of Ships

Khedmati Mohammad Reza ، KAIVANFAR IRAJ

Iran

Journal Papers

RAHBARIMANESH HOSSEIN ، Khedmati Mohammad Reza, "A detailed comparison of different corrosion addition models on ultimate strength of product tankers", Heliyon, 2026 Jul vol. 12, no. 12, pp.1-28, 2026.

HADIPOUR GOUDARZI ROUHOLLAH ، Khedmati Mohammad Reza, "Influence of superstructure-hull adhesive bonds on longitudinal bending performance of ship hull girder", Results In Engineering, 2026 Jun vol. 30, no. , pp.1-20, 2026.

ZENDEHDEL REZA ، Khedmati Mohammad Reza, "A numerical investigation into the strength of offshore jacket platforms considering time-variant zonal corrosion subjected to alternative ship impacts", Heliyon, 2024 Dec vol. 10, no. 24, pp.1-29, 2024.

Musa Bahmani ، Fattaneh Morshedsolouk ، Khedmati Mohammad Reza, "Effect of Cracked and Notched Stiffeners on the Ultimate Strength of Steel Stiffened Panels", Journal of Marine Science and Application, 2024 May vol. 23, no. 0, pp.460-469, 2024.

JAFARPOUR HAMEDANI SHAHED ، Khedmati Mohammad Reza, "Optimized planning for weather-sensitive offshore construction operations - An application to float-over installation of super-heavy offshore topsides", Ocean Engineering, 2024 Apr vol. 297, no. 117027, pp.1-13, 2024.

JAFARPOUR HAMEDANI SHAHED ، Khedmati Mohammad Reza, "Optimal weather window for transportation of large-scale offshore structures", Marine Structures, 2023 Jul vol. 92, no. 11, pp.1-16, 2023.

Rohollah Mirzaaghanasab Gerdrodbary ، Khedmati Mohammad Reza ، Karim Akbari Vakilabadi ، Abolfath Askarian Khoob, "Experimental study of the pressure on the hulls of trimaran vessel from the viewpoint of the slamming phenomenon", , 2023 May vol. 10, no. 1, pp.25-35, 2023.

، Khedmati Mohammad Reza, "Progressive collapse analysis of a bulk carrier hull girder under longitudinal vertical bending moment considering cracking damage", Ocean Engineering, 2021 Dec vol. 242, no. 1, pp.110-140, 2021.

Hamid Moaieri ، Khedmati Mohammad Reza, "Studying the effect of shock wave impact on the ultimate strength of unstiffened steel plates under unidirectional in-plane compression using numerical simulation", , 2021 Nov vol. 8, no. 3, pp.71-82, 2021.

FERDOWSI HOSSEIN ABADI OMID ، Khedmati Mohammad Reza, "A review on ultimate strength of aluminium structural elements and systems for marine applications", Ocean Engineering, 2021 Jul vol. 232, no. 7, pp.109153-109153, 2021.

Mojtaba Shokri ، Khedmati Mohammad Reza ، Karim Akbari Vakilabadi ، REZAYI SANGTABI MOHAMMAD, "Experimental Analysis of slam-induced pressure on the bow-segment of surface ship", Journal of Marine Engineering, 2021 Jun vol. 17, no. 33, pp.77-83, 2021.

FERDOWSI HOSSEIN ABADI OMID ، Khedmati Mohammad Reza ، NOROZI POUR MOHSEN, "Statistical analysis of initial deflection of aluminium plating between stiffeners", Thin-Walled Structures, 2021 Apr vol. 161, no. 4, pp.107528-107528, 2021.

MOAIERI HAMID ، Khedmati Mohammad Reza, "A detailed finite element investigation of the effects of local lateral high-velocity impacts on the ultimate strength of unstiffened steel plates subjected to uniaxial in-plane compression", Marine Structures, 2021 Jan vol. 75, no. 1, pp.102842-102842, 2021.

JAFARPOUR HAMEDANI SHAHED ، Khedmati Mohammad Reza, "Vibration analysis of stiffened plates with initial geometric imperfections", Proceedings of The Institution of Mechanical Engineers Part M-Journal of Engineering For The Maritime Environment, 2020 Oct vol. 235, no. 2, pp.521-531, 2020.

Abbas Hasan Abadi ، Karim Akbari Vakilabadi ، Khedmati Mohammad Reza, "Analysis of the effect of corrosion on the residual tensile strength of aged ships plate using tensile testing", , 2020 Oct vol. 7, no. 3, pp.51-61, 2020.

NOURI ZORAREH ، Khedmati Mohammad Reza, "Progressive Collapse Analysis of an FPSO Vessel Hull Girder Under Vertical Bending Considering Different Corrosion Models", Journal of Marine Science and Application, 2020 Oct vol. 19, no. 4, pp.674-692, 2020.

SALOO MEHDI ، KABIR MOHAMMAD ZAMAN ، Khedmati Mohammad Reza, "Assessment of performance criteria of reinforced concrete beams retrofitted with FRP fabrics subjected to extreme impulsive loading", Advanced Composite Materials, 2020 Mar vol. 0, no. 0, pp.1-23, 2020.

PETROSIAN ARNO ، Khedmati Mohammad Reza ، NAZARI MASOUD, "Investigation of Static Strength of Tubular T Joints due Different Patterns of pitting Corrosion under out-plane bending loading", , 2020 Feb vol. 6, no. 4, pp.96-105, 2020.

HADIPOURGODARZI ROHALLAH ، Khedmati Mohammad Reza, "An experimental and numerical investigation of adhesive bond strength in Al-GFRP single lap and double butt lap joints due to applied longitudinal loads", Ships and Offshore Structures, 2019 Sep vol. 15, no. 4, pp.1-14, 2019.

PEDRAM MASOUD ، Khedmati Mohammad Reza ، ESFANDIARI AKBAR ، Hossein Kazem, "Damage detection in dolphin platform of a wharf by finite element model updating", Amirkabir Journal of Civil Engineering, 2019 Aug vol. 51, no. 3, pp.479-490, 2019.

BABAZADEH ASHKAN ، Khedmati Mohammad Reza, "Empirical formulations for estimation of ultimate strength of cracked continuous unstiffened plates used in ship structure under in-plane longitudinal compression", Engineering Failure Analysis, 2019 Jun vol. 100, no. 6, pp.470-484, 2019.

BABAZADEH ASHKAN ، Khedmati Mohammad Reza, "Semi-analytical simulation of plastic collapse mechanism of cracked continuous unstiffened plates used in ship structure under in-plane longitudinal compression", Thin-Walled Structures, 2019 Jun vol. 144, no. 0, pp.106264-106264, 2019.

، Khedmati Mohammad Reza, "Semi-analytical simulation of plastic collapse mechanism of cracked continuous unstiffened plates used in ship structure under in-plane longitudinal compression", Thin-Walled Structures, 2019 Jun vol. 144, no. 1, pp.106-264, 2019.

، Khedmati Mohammad Reza, "Empirical formulations for estimation of ultimate strength of cracked continuous unstiffened plates used in ship structure under in-plane longitudinal compression", Engineering Failure Analysis, 2019 Mar vol. 100, no. 1, pp.470-484, 2019.

MOHAMADI MILAD ، Khedmati Mohammad Reza ، BAHMYARI EHSAN, "Elastic local buckling strength analysis of stiffened aluminium plates with an emphasis on the initial deflections and welding residual stresses", Ships and Offshore Structures, 2019 Feb vol. 14, no. 2, pp.125-140, 2019.

Karim Akbari Vakilabadi ، Khedmati Mohammad Reza ، Abbas Hasan Abadi ، Alireza Mohammadi, "Resistance Prediction for a Novel Trimaran with Wave Piercing Bow", International Journal of Maritime Technology, 2018 Dec vol. 9, no. 4, pp.33-40, 2018.

NAJAFZADEH DONYA ، SHAIKHZADEH NAJAR SAEED ، Khedmati Mohammad Reza, "Experimental and theoretical analysis of air inflated circular woven fabric deformation", Journal of The Textile Institute, 2018 Dec vol. 109, no. 1, pp.1-10, 2018.

OMIDALI MAHDI ، Khedmati Mohammad Reza, "Numerical investigation on novel geometrical configuration for adhesively bonded T-joint between aluminum and sandwich panel", Thin-Walled Structures, 2018 Oct vol. 131, no. 10, pp.122-134, 2018.

BABAZADEH ASHKAN ، Khedmati Mohammad Reza, "Ultimate strength of cracked ship structural elements and systems: A review", Engineering Failure Analysis, 2018 Jul vol. 89, no. 0, pp.242-257, 2018.

OMIDALI MAHDI ، Khedmati Mohammad Reza, "Reliability-based design of stiffened plates in ship structures subject to wheel patch loading", Thin-Walled Structures, 2018 Jun vol. 127, no. 6, pp.416-424, 2018.

، Khedmati Mohammad Reza, "Ultimate strength of cracked ship structural elements and systems: A review", Engineering Failure Analysis, 2018 Mar vol. 89, no. 1, pp.242-257, 2018.

Karim Akbari ، Khedmati Mohammad Reza ، Abbas HasanAbadi ، Alireza Mohammadi, "Resistance Prediction for a Novel Trimaran with Wave Piercing Bow", International Journal of Maritime Technology, 2018 Feb vol. 9, no. 4, pp.33-40, 2018.

BAHMYARI EHSAN ، Khedmati Mohammad Reza ، Carlos Guedes Soares, "Stochastic analysis of coupled heave-roll ship motion using the domain decomposition chaotic radial basis function", Ocean Engineering, 2017 Aug vol. 140, no. 8, pp.322-333, 2017.

DEHGHANIAN ALI ، Khedmati Mohammad Reza ، GHASSEMI HASSAN, "PRACTICAL APPROACHES OF INDUCING CONTROLLED SIMULATED RESIN STARVATION AREAS INTO VACUUM INFUSION PROCESSED SANDWICH COMPOSITES USED FOR CHARACTERIZATION OF THE SURFACE DEFECTS AND THEIR OUTCOMES", Latin American Journal of Solids and Structures, 2017 Jun vol. 14, no. 6, pp.1170-1182, 2017.

SALEMIZADEH NAJMEH ، Khedmati Mohammad Reza, "The Effect of Initial Defects, Corrosion and Cracks on The Ultimate Strength of a Bulk Carrier Ship", Iranian Journal of Marine Science and Technology, 2017 Jun vol. 81, no. 81, pp.18-22, 2017.

BAHMYARI EHSAN ، Khedmati Mohammad Reza, "Uncertainty quantification in bending analysis of moderately thick plates with elastically restrained edges using the Chaotic Radial Basis Function", Acta Mechanica, 2017 Jun vol. 228, no. 6, pp.2083-2105, 2017.

OMIDALI MAHDI ، Khedmati Mohammad Reza ، HADIPOURGODARZI ROHALLAH, "Numerical Investigation on Novel Method for Adhesively Bonded T-joint Between Aluminum and Sandwich Panel", Journal of Marine Science and Technology, 2017 May vol. 16, no. 1, pp.122-134, 2017.

PEDRAM MASOUD ، ESFANDIARI AKBAR ، Khedmati Mohammad Reza, "Frequency domain damage detection of plate and shell structures by finite element model updating", Inverse Problems In Science and Engineering, 2017 Apr vol. 26, no. 4, pp.1-33, 2017.

BAHMYARI EHSAN ، Khedmati Mohammad Reza, "Stochastic analysis of thin plates on elastic foundation by combining the generalized polynomial chaos and element free Galerkin method", Journal of Mechanical Science and Technology, 2017 Apr vol. 31, no. 4, pp.1813-1824, 2017.

BAHMYARI EHSAN ، Khedmati Mohammad Reza ، Carlos Guedes Soares, "Stochastic analysis of moderately thick plates using the generalized polynomial chaos and element free Galerkin method", Engineering Analysis With Boundary Elements, 2017 Mar vol. 79, no. 0, pp.23-37, 2017.

PEDRAM MASOUD ، ESFANDIARI AKBAR ، Khedmati Mohammad Reza, "Damage detection by a FE model updating method using power spectral density: Numerical and experimental investigation", Journal of Sound and Vibration, 2017 Feb vol. 397, no. 1, pp.51-76, 2017.

BABAZADEH ASHKAN ، Khedmati Mohammad Reza, "FINITE ELEMENT INVESTIGATION OF PERFORMANCE OF COMPOSITE-STEEL DOUBLE LAP ADHESIVE JOINT UNDER TENSILE LOADING", Latin American Journal of Solids and Structures, 2017 Jan vol. 14, no. 2, pp.277-291, 2017.

RASHIDI MAJID ، NAZARI MASOUD ، Khedmati Mohammad Reza ، ESFANDIARI AKBAR, "NUMERICAL MODELING OF CORROSION EFFECTS ON ULTIMATE STRENGTH OF DX TUBULAR JOINTS", Latin American Journal of Solids and Structures, 2016 Dec vol. 14, no. 2, pp.217-242, 2016.

BENSHAMS AMIRMOZAFAR ، Saman Shafeienejad ، KABIR MOHAMMAD ZAMAN ، HATAMI FARZAD ، Khedmati Mohammad Reza ، SAYEHBANI MESBAH, "Investigate the Performance of SMA-FRP Composite Bars in Seismic Regions under Corrosion Conditions", World Academy of Science, Engineering and Technology, 2016 Apr vol. 2016, no. 3, pp.129-133, 2016.

Abdolhosein MohammadRahimi ، Khedmati Mohammad Reza, "Elastic Analysis of Plated Grillages in Ships' Structures using Finite Element Method", Journal of Marine Science and Technology, 2016 Apr vol. 15, no. 1, pp.35-48, 2016.

AKBARI VAKIL ABADI KARIM ، Khedmati Mohammad Reza ، Habib A. Sayyari, "Implementation Of Elastic Hinge For Structural Slender Ship Model Test In Towing Tank", , 2016 Feb vol. 2, no. 2, pp.54-64, 2016.

PEDRAM MASOUD ، ESFANDIARI AKBAR ، Khedmati Mohammad Reza, "Finite element model updating using strain-based power spectral density for damage detection", Structural Control and Health Monitoring, 2016 Feb vol. 23, no. 4, pp.1-20, 2016.

HADIPOURGODARZI ROHALLAH ، Khedmati Mohammad Reza, "AN EXPERIMENTAL INVESTIGATION OF STATIC LOAD CAPACITY OF AL-GFRP ADHESIVELY BONDED SINGLE LAP AND DOUBLE BUTT LAP JOINTS", Latin American Journal of Solids and Structures, 2015 Aug vol. 12, no. 8, pp.1583-1594, 2015.

Khedmati Mohammad Reza ، NOURI ZORAREH, "Analytical simulation of nonlinear elastic-plastic average stress-average strain relationships for un-corroded/both-sides randomly corroded steel plates under uniaxial compression", Thin-Walled Structures, 2015 Jan vol. 86, no. 1, pp.132-141, 2015.

EDALAT PEDRAM ، Khedmati Mohammad Reza ، Carlos Guedes Soares, "Free vibration of stiffened open shells with variable radii of curvature using extended Kantorovich-Ritz method", Ships and Offshore Structures, 2014 Dec vol. 9, no. 11, pp.1-14, 2014.

AKBARI VAKIL ABADI KARIM ، Khedmati Mohammad Reza ، Mohammad Saeid Seif, "Experimental study on heave and pitch motion characteristics of a wave-piercing trimaran", Transactions of Famena, 2014 Dec vol. 38, no. 3, pp.13-26, 2014.

NAZARI MASOUD ، Khedmati Mohammad Reza ، KHALAJ AMIRFOAD, "A numerical investigation into ultimate strength and buckling behavior of locally corroded steel tubular members", Latin American Journal of Solids and Structures, 2014 Nov vol. 11, no. 6, pp.1063-1076, 2014.

Abbas Bayatfar ، Khedmati Mohammad Reza ، Philippe Rigo, "Residual ultimate strength of cracked steel unstiffened and stiffened plates under longitudinal compression", Thin-Walled Structures, 2014 Nov vol. 84, no. 11, pp.378-392, 2014.

Khedmati Mohammad Reza ، RASHEDI AHMADREZA, "Nonlinear finite element modeling and progressive collapse analysis of a product carrier under longitudinal bending", Applied Ocean Research, 2014 Oct vol. 48, no. 10, pp.80-102, 2014.

MOHAMMADI MOHSEN ، Khedmati Mohammad Reza ، AKBARI VAKIL ABADI KARIM, "Effects of hull damage on global loads acting on a trimaran ship", Ships and Offshore Structures, 2014 Sep vol. 9, no. 12, pp.1-12, 2014.

MORSHEDSOLOUK FATTANEH ، Khedmati Mohammad Reza, "Parametric study on average stress-average strain curve of composite stiffened plates using progressive failure method", Latin American Journal of Solids and Structures, 2014 Sep vol. 11, no. 12, pp.2203-2226, 2014.

BEYGI HARCHEGANI ALI ، EDALAT PEDRAM ، Khedmati Mohammad Reza ، FADAVIE MANOUCHEHR, "A Numerical Investigation into the Crack Effects on the Natural Frequencies of the Plates", International Journal of Maritime Technology, 2014 Sep vol. volume 2, no. 1, pp.29-41, 2014.

BAHRAMI ATAABADI POURIA ، Khedmati Mohammad Reza ، Mostafa Bahrami Ataabadi, "Free Vibration Analysis of Orthtropic Thin Cylindrical Shells with Variable Thickness by Using Spline Functions", Latin American Journal of Solids and Structures, 2014 Sep vol. 11, no. 12, pp.2099-2121, 2014.

AKBARI VAKIL ABADI KARIM ، Khedmati Mohammad Reza ، Habib A Sayyari, "Analysis of the flexural mode response of a novel trimaran by Segmented model test", Latin American Journal of Solids and Structures, 2014 Sep vol. 11, no. 14, pp.2573-2588, 2014.

Khedmati Mohammad Reza ، MEMARIAN HAMID REZA ، FADAVIE MANOUCHEHR ، Mohammad Reza Zareei, "Ultimate strength of continuous stiffened aluminium plates under combined biaxial compression and lateral pressure", Latin American Journal of Solids and Structures, 2014 Sep vol. 11, no. 15, pp.20-34, 2014.

Khedmati Mohammad Reza ، MEMARIAN HAMID REZA ، FADAVIE MANOUCHEHR ، Mohammad Reza Zareei, "Empirical formulations for estimation of ultimate strength of continuous aluminium stiffened plates under combined transverse compression and lateral pressure", Ships and Offshore Structures, 2014 Sep vol. 9, no. 12, pp.1-10, 2014.

FERDOWSI HOSSEIN ABADI OMID ، Khedmati Mohammad Reza, "Structural Analysis of an Aluminium High Speed Monohull using Finite Element Software", Iranian Journal of Marine Science and Technology, 2014 Aug vol. 70, no. 1, pp.1-10, 2014.

EDALAT PEDRAM ، Khedmati Mohammad Reza ، Carlos Guedes Soares, "Free vibration analysis of open thin deep shells with variable radii of curvature", Meccanica, 2014 Jun vol. 49, no. 6, pp.1385-1405, 2014.

Khedmati Mohammad Reza ، PEDRAM MASOUD, "A numerical investigation into the effects of slamming impulsive loads on the elastic-plastic response of imperfect stiffened aluminium plates", Thin-Walled Structures, 2014 Mar vol. 76, no. 3, pp.118-144, 2014.

PEDRAM MASOUD ، Khedmati Mohammad Reza, "The effect of welding on the strength of aluminum stiffened plates subject to combined uniaxial compression and lateral pressure", International Journal of Naval Architecture and Ocean Engineering, 2014 Mar vol. 6, no. 1, pp.39-59, 2014.

Khedmati Mohammad Reza ، PEDRAM MASOUD ، Philippe Rigo, "The effects of geometrical imperfections on the ultimate strength of aluminium stiffened plates subject to combined uniaxial compression and lateral pressure", Ships and Offshore Structures, 2014 Feb vol. 9, no. 1, pp.88-109, 2014.

AMIRIYAN YOSEF ، MORSHEDSOLOUK FATTANEH ، Khedmati Mohammad Reza, "Investigation of Post-Buckling Behaviour of Hat Stiffened Composite Plate Using Layers Death Method", , 2013 Dec vol. 15, no. 36, pp.1-12, 2013.

Khedmati Mohammad Reza ، REZAYI SANGTAYI MOHAMMAD ، FAKORI MEHDI, "Stacking Sequence Optimisation of Composite Panels Subjected to Slamming Impact Loads using a Genetic Algorithm", Latin American Journal of Solids and Structures, 2013 Sep vol. 10, no. 5, pp.1043-1060, 2013.

Khedmati Mohammad Reza ، EDALAT PEDRAM, "Ultimate Strength Characteristics of a Ship's Deck Stiffened Plate Structure in the Presence of Camber Parabolic Curvature", Journal of Offshore Mechanics and Arctic Engineering-Transactions of The Asme, 2013 Aug vol. 135, no. 3, pp.1-10, 2013.

EDALAT PEDRAM ، Khedmati Mohammad Reza ، Carlos Guedes Soares, "Free Vibration and Dynamic Response Analysis of Stiffened Parabolic Shells using Equivalent Orthotropic Shell Parameters", Latin American Journal of Solids and Structures, 2013 Jul vol. 10, no. 4, pp.747-766, 2013.

BAHMYARI EHSAN ، Khedmati Mohammad Reza, "Vibration analysis of nonhomogeneous moderately thick plates with point supports resting on Pasternak elastic foundation using element free Galerkin method", Engineering Analysis With Boundary Elements, 2013 Jul vol. 37, no. 10, pp.1212-1238, 2013.

SADEGHI MOHAMMAD HOSSEIN ، Khedmati Mohammad Reza ، Amin Najafi, "Modelling of Blast Wave Loads Imposed on Ship Decks and Analysis of their Local Structural Response", , 2012 Dec vol. 28, no. 1, pp.47-56, 2012.

Habib O.Sayyari ، Khedmati Mohammad Reza ، AKBARI VAKIL ABADI KARIM, "Investigation of novel naval vessels and selection of optimised hull for future fleet", Iranian Journal of Marine Science and Technology, 2012 Nov vol. 63, no. 3, pp.44-54, 2012.

NOURI ZORAREH ، Khedmati Mohammad Reza ، Shokoufeh Sadeghifard, "An effective thickness proposal for strength evaluation of oneside pitted steel plates under uniaxial compression", Latin American Journal of Solids and Structures, 2012 Aug vol. 9, no. 4, pp.475-496, 2012.

Mohammad Reza Zareei ، Khedmati Mohammad Reza ، Philippe Rigo, "Application of artificial neural networks to the evaluation of the ultimate strength of uniaxially compressed welded stiffened aluminium plates", Proceedings of The Institution of Mechanical Engineers Part M-Journal of Engineering For The Maritime Environment, 2012 Jul vol. 226, no. 3, pp.197-213, 2012.

SADEGHI MOHAMMAD HOSSEIN ، Khedmati Mohammad Reza, "Simulation of Gun Wave Blast Load for Different Distances", Iranian Journal of Marine Science and Technology, 2012 Jun vol. 61, no. 1, pp.1-9, 2012.

Khedmati Mohammad Reza ، NOURI ZORAREH ، ROSHANALI MOHAMMAD MEHDI, "A comparative computational investigation on the effects of randomly distributed general corrosion on the post-buckling behaviour of uniaxially loaded plates", Journal of Mechanical Science and Technology, 2012 Mar vol. 26, no. 3, pp.767-783, 2012.

JAFARPOUR HAMEDANI SHAHED ، Khedmati Mohammad Reza, "Linear Vibration Analysis of Stiffened Plates", Iranian Journal of Marine Science and Technology, 2012 Feb vol. 18, no. 60, pp.30-42, 2012.

Khedmati Mohammad Reza ، NOURI ZORAREH ، Karim Moradi Dohezari, "A computational investigation of the effects of both-sides general corrosion on the buckling plastic collapse behaviour and strength of stiffened plates", Journal of Marine Science and Technology, 2012 Feb vol. 17, no. 1, pp.68-93, 2012.

Khedmati Mohammad Reza ، NAZARI MASOUD, "A numerical investigation into strength and deformation characteristics of preloaded tubular members under lateral impact loads", Marine Structures, 2012 Jan vol. 25, no. 1, pp.33-57, 2012.

JAFARPOUR HAMEDANI SHAHED ، Khedmati Mohammad Reza ، Saeed Azkat, "Vibration analysis of stiffened plates using Finite Element Method", Latin American Journal of Solids and Structures, 2012 Jan vol. 9, no. 1, pp.1-20, 2012.

EDALAT PEDRAM ، Khedmati Mohammad Reza, "Elastic-Plastic Analysis Of Ship Bilge Plate Under In-Plane Uniaxial Compressive Load", , 2011 Dec vol. 6, no. 12, pp.17-27, 2011.

MORSHEDSOLOUK FATTANEH ، Khedmati Mohammad Reza, "An extension of coupled beam method and its application to study ship's hull-superstructure interaction problems", Latin American Journal of Solids and Structures, 2011 Sep vol. 8, no. 3, pp.265-290, 2011.

REZAYI SANGTABI MOHAMMAD ، Khedmati Mohammad Reza ، FAKORI MEHDI, "Optimization of stacking sequence for composite plates subjected to slamming impact load using genetic algorithm method", , 2011 Sep vol. 7, no. 13, pp.29-38, 2011.

FAKORI MEHDI ، Khedmati Mohammad Reza ، REZAYI SANGTAYI MOHAMMAD, "Progressive Damage Analysis of Curved Marine Composite Sandwich Panels under Lateral Impact Pressure", , 2011 May vol. 13, no. 27, pp.63-73, 2011.

Khedmati Mohammad Reza ، KAIVANFAR IRAJ, "A Computational Investigation on the Effects of Hull Geometry and Stiffeners on the Axial Crushing Strength and Behavior of Aluminum High Speed Crafts", Journal of Offshore Mechanics and Arctic Engineering-Transactions of The Asme, 2011 Apr vol. 133, no. 3, pp.1-10, 2011.

Khedmati Mohammad Reza ، ROSHANALI MOHAMMAD MEHDI ، NOURI ZORAREH, "Strength of steel plates with both-sides randomly distributed with corrosion wastage under uniaxial compression", Thin-Walled Structures, 2011 Mar vol. 49, no. 2, , 2011.

Khedmati Mohammad Reza ، NOURI ZORAREH ، ROSHANALI MOHAMMAD MEHDI, "An effective proposal for strength evaluation of steel plates randomly corroded on both sides under uniaxial compression", Steel and Composite Structures, 2011 Mar vol. 11, no. 3, pp.183-205, 2011.

Khedmati Mohammad Reza ، KAIVANFAR IRAJ, "Crushing response of bow structure of aluminium high-speed crafts at the event of inclined collisions: numerical simulation", International Journal of Crashworthiness, 2010 Oct vol. 15, no. 5, , 2010.

Khedmati Mohammad Reza ، EDALAT PEDRAM, "A numerical investigation into the effects of parabolic curvature on the buckling strength and behaviour of stiffened plates under in-plane compression", Latin American Journal of Solids and Structures, 2010 Sep vol. 7, no. 3, , 2010.

NOURI ZORAREH ، Khedmati Mohammad Reza ، ROSHANALI MOHAMMAD MEHDI, "Degradation of the compressive strength of unstiffened/stiffened steel plates due to both-sides randomly distributed corrosion wastage", Latin American Journal of Solids and Structures, 2010 Sep vol. 7, no. 3, , 2010.

Khedmati Mohammad Reza, "Empirical formulations for estimation of ultimate strength of continuous stiffened aluminium plates under combined in-plane compression and lateral pressure", International Jouranl of Thin_ Walled Structures, 2010 Mar vol. 48, no. 3, , 2010.

Khedmati Mohammad Reza, "Post-buckling behaviour and strength of multi-stiffened aluminium panels under combined axial compression and lateral pressure", Marine Structures, 2010 Feb vol. 23, no. 1, , 2010.

Khedmati Mohammad Reza ،, "A numerical assessment of the buckling/ultimate strength characteristics of stiffened aluminium plates with fixed/floating transverse frames", , 2009 Nov vol. 47, no. 11, , 2009.

Khedmati Mohammad Reza ، ZAREEI MOHAMMAD REZA ، philippe rigo, "Sensitivity analysis on the elastic buckling and ultimate strength of continuous stiffened aluminium plates under combined in-plane compression and lateral pressure", , 2009 Nov vol. 47, no. 11, , 2009.

Khedmati Mohammad Reza ، ، EDALAT PEDRAM, "static and dynamic structural analysis of aluminium craft deck structures, subjected to repeated impact load", Latin American Journal of Solids and Structures, 2009 Sep vol. 6, no. 3, , 2009.

Khedmati Mohammad Reza ، EDALAT PEDRAM ،, "Sensitivity analysis of the elastic buckling of cracked plate elements under axial compression", , 2009 May vol. 47, no. 5, , 2009.

Khedmati Mohammad Reza ، ،, "Ultimate strength and ductility characteristics of intermittently welded stiffened plates", Journal of Constructional Steel Research, 2009 Mar vol. 65, no. 3, , 2009.

Khedmati Mohammad Reza ،, "Ultimate strength and ductility characteristics of intermittently welded stiffened plates under in-plane axial compression", Journal of Offshore Mechanics and Arctic Engineering-Transactions of The Asme, 2008 Feb vol. 130, no. 1, , 2008.

100

NOURI ZORAREH ، Khedmati Mohammad Reza, "Review Study about the Underwater Explosion", Iranian Journal of Marine Science and Technology, 2007 Dec vol. 15, no. 46, pp.34-40, 2007.

101

Khedmati Mohammad Reza ، ،, "Numerical Study on The Permissible Gap of Intermittent Fillet Welds of Longitudinally Stiffened Plates Under in Plane Axial Compression", Journal of Constructional Steel Research, 2007 Oct vol. 63, no. 10, , 2007.

102

Khedmati Mohammad Reza ، ،, "A comparative study on three different construction methods of stiffened plates- strength behaviour and ductility characteristics", Rem-Revista Escola De Minas, 2007 Jun vol. 60, no. 2, , 2007.

103

، Khedmati Mohammad Reza, "Numerical and Experimental Investigations on the Compression Behaviour of Stiffened Plates", Journal of Constructional Steel Research, 2006 Nov vol. 62, no. 11, , 2006.

104

Khedmati Mohammad Reza, "Simulation of Average Stress_Average Strain Relationship of Ship Unstiffened /Stiffened Plates Subject to in _Plane Compression", , 2005 Oct vol. 12, no. 4, , 2005.

105

M. fujikubo ، Minoru Harada ، T. Yao ، Khedmati Mohammad Reza ، D Yanagihara, "Estimation of Ultimate Strength of Continuous Stiffened Panel Under Combined Transverse Thrust and Lateral Pressure Part 2 :Continuous Stiffened Panel", Marine Structures, 2005 Sep vol. 18, no. 0, , 2005.

106

M. fujikubo ، T. Yao ، Khedmati Mohammad Reza ، Minoru Harada ، D Yanagihara, "Estimation of Ultimate Strength of Continuous Stiffened Panel Under Combined Transverse Thrust and Lateral Pressure Part 1:Continuous Plate", Marine Structures, 2005 Sep vol. 18, no. 0, , 2005.

107

Khedmati Mohammad Reza, "Collapse behaviour of plates under thrust", , 2004 Jun vol. 1, no. 1, , 2004.

108

Khedmati Mohammad Reza, "Effects of initial imperfections on buckling/plastic collapse behaviour and stiffness of uniaxially loaded rectangular plates", , 2003 Jan vol. 21, no. 0, , 2003.

109

T. Yao ، M. fujikubo ، Khedmati Mohammad Reza, "Progressive collapse analysis of a ship,s hull girder under longitudinal bending considering local pressure loads", , 2000 Jun vol. 188, no. 0, , 2000.

110

Khedmati Mohammad Reza ، M. fujikubo ، D Yanagihara ، T. Yao, "Buckling/plastic collapse behaviour and strength of continuous stiffened plates under combined biaxial thrust and lateral pressure", , 2000 May vol. 100, no. 0, , 2000.

111

M. fujikubo ، T. Yao ، Khedmati Mohammad Reza, "Estimation of ultimate strength of ship bottom plating under combined transverse thrust and lateral pressure", , 1999 Jun vol. 186, no. 0, , 1999.

112

M. fujikubo ، T. Yao ، Khedmati Mohammad Reza, "Estimation of ultimate strength of ship bottom plating under combined biaxial thrust and lateral pressure", , 1999 Jan vol. 99, no. 0, , 1999.

Conference Papers

LOTFOLLAHI YAGHIN AMIRHOSSEIN ، Khedmati Mohammad Reza, "The prediction of the impact force of a vessel during automatic mooring on offshore platforms using dynamic modeling and machine learning,", 9th International Offshore Industries Conference: Application of artificial intelligence in offshore industries, Nov 2025.

، KESHAVARZ ALIREZA ، Khedmati Mohammad Reza, "Design and Evaluation of a Neural Network for Predicting the Ultimate Strength of a Cracked Unstiffened Plate,", FIRST ARTIFICIAL INTELLIGENCE IN MARITIME INDUSTRIES CONFERENCE, May 2025.

، Khedmati Mohammad Reza ، ZAKIYAN ALI, "The effect of boundary conditions on the stress intensity factor of cracked ship hull structural elements,", Marine Industry Conference (MIC2022), Feb 2023.

ZENDEHDEL REZA ، Khedmati Mohammad Reza, "A review of studies on the effects of ship impact on the behavior and strength of offshore fixed platforms members,", 22nd Marine Industries Conference, Feb 2022.

RAHBARIMANESH HOSSEIN ، Khedmati Mohammad Reza, "Evaluation of the ultimate strength of a product tanker, taking into account the corrosion effect,", 21th Marine Industries Conference, Jan 2020.

RAHBARIMANESH HOSSEIN ، Khedmati Mohammad Reza, "Review of practical corrosion models for oil tankers,", 21th Marine Industries Conference, Jan 2020.

KOULIYAN SANA ، Khedmati Mohammad Reza, "An overview of buckling, bending and rupture in sandwich structures,", 21th Marine Industries Conference, Jan 2020.

BARANI FATEMEH ، Khedmati Mohammad Reza, "Modeling and analysis of ship bottom structure when launching on airbags,", 21th Marine Industries Conference, Jan 2020.

NAJAFI MEHDI ، Khedmati Mohammad Reza ، SAYEHBANI MESBAH, "Numerical simulation of the deformation of steel plates during forming process by line heating and investigation of factors affecting it,", 8th Iran International Conferenece on Materials Science & Metallurgical Engineering, Oct 2019.

SHAIKHZADEH NAJAR SAEED ، NAJAFZADEH DONYA ، Khedmati Mohammad Reza, "Numerical and Theoretical Study of Circular Inflatable Fabric Deflection,", 15th Asian Textile Conference, ATC-15, Sep 2019.

ASKARI MEHDI ، Khedmati Mohammad Reza, "Numerical analysis of the effect of shearing on the transverse section of the ship on its ultimate strength under vertical bending,", 8th International Offshore Industries Conference, Jun 2019.

Khedmati Mohammad Reza ، AZIMI GHADIKOLAEI MOHAMMAD ، NAZARI MASOUD, "Evaluation of the ultimate strength of the tubular members of marine platforms including pitting corrosion,", 4th International Conference on Structural Engineering, Feb 2018.

TAVANA ELAHE ، Khedmati Mohammad Reza ، NAZARI MASOUD, "Evaluation of the static strength of the tubular connections with the inclusion of random pitting corrosion under compressive axial force,", 4th International Conference on Structural Engineering, Feb 2018.

Khedmati Mohammad Reza ، AZIMI GHADIKOLAEI MOHAMMAD ، NAZARI MASOUD, "Investigation of the strength of tubular members of marine platforms with pitting corrosion under axial load and lateral impact,", 4th International Conference on Structural Engineering, Feb 2018.

Shahed Jafarpoor Hamedani ، Khedmati Mohammad Reza ، IRANMANESH MEHDI, "Analysis of marine pipelines under the influence of peripheral loads during installation,", 19th International Marine Industries Conference, Dec 2017.

MAZIDI MOHAMAD ، Khedmati Mohammad Reza, "Estimation of welding distortion in but-welded plates with different sequences,", 18th Marine Industries Conference, Oct 2016.

DEHGHANIAN ALI ، Khedmati Mohammad Reza ، GHASSEMI HASSAN, "Investigation of the effects of starvation on strength reduction of VIP-manufactured composite panels under inplane compression,", 18th Marine Industries Conference, Oct 2016.

RASHIDI MAJID ، Khedmati Mohammad Reza ، ESFANDIARI AKBAR ، NAZARI MASOUD, "INVESTIGATION ON CORROSION EFFECTS ON ULTIMATE STRENGTH OF DX TUBULAR JOINTS,", 11th International Conference on Coasts, Ports and Marine Structures, Oct 2016.

KABIR MOHAMMAD ZAMAN ، TOLOUEI MOHAMMAD ، Khedmati Mohammad Reza, "study on the effect of corrugated web girder on lateral-torsional buckling capacity,", 1st National conference on applied research in structural engineering and construction management, Sep 2016.

KABIR MOHAMMAD ZAMAN ، TOLOUEI MOHAMMAD ، Khedmati Mohammad Reza, "study on the effect of corrugated web girder angle on buckling capacity,", 1st National conference on applied research in structural engineering and construction management, Sep 2016.

FERDOWSI HOSSEIN ABADI OMID ، Khedmati Mohammad Reza, "Evaluation of ultimate strength of box girders simulating middle body of the ships,", 6th Conference on Steel & Structure, Dec 2015.

SALOO MEHDI ، KABIR MOHAMMAD ZAMAN ، Khedmati Mohammad Reza ، Amin Moradi momen, "The flexural and shear response of retrofitted RC beam by using FRP under explosion loading,", 3rd. international conference on civil Engineering, Architecture, and Urban Development, Dec 2015.

SALOO MEHDI ، KABIR MOHAMMAD ZAMAN ، Khedmati Mohammad Reza ، Amin Moradi Momen, "The flexural and shear response of retrofitted RC beam by using FRP under explosion loading,", 3rd. international conference on civil Engineering, Architecture, and Urban Development, Dec 2015.

AMIRIYAN YOSEF ، Khedmati Mohammad Reza, "Comparison of buckling and post-buckling behavior of a healthy and defective composite panel under the influence of water penetration in the sea environment by numerical methods.,", 4th National Conference of high speed craft, Apr 2015.

Yousof Amirian ، Moslem Najafi ، Khedmati Mohammad Reza, "Numerical study of high velocity impact response of kevlar and glass woven fabrics,", 16th Marine Industries Conference, Dec 2014.

Khedmati Mohammad Reza ، MOAIERI HAMID ، Ali Amini ، Hadi Tohidi, "Analysis of cracked plate under undex loading,", 16th Marine Industries Conference, Dec 2014.

DEHGHANIAN ALI ، Khedmati Mohammad Reza ، GHASSEMI HASSAN, "Effect of Dry Void Spaces on Reduction of Bending Strength of Composite Panes fabricated using VIP,", 16th Marine Industries Conference, Dec 2014.

Ebrahim Soleimani ، Khedmati Mohammad Reza ، Ali Mohammad Mirjalili ، Ali Haji Abadi, "Stacking sequence optimisation of high speed crafts using genetic algorithms,", 16th Marine Industries Conference, Dec 2014.

HOSEIN POOR MOHAMMAD SADEGH ، PEDRAM MASOUD ، Khedmati Mohammad Reza, "Application of fourier transformation to investigation of slamming pulse iterations on steel stiffened plates,", 16th Marine Industries Conference, Dec 2014.

MAHMOODI SALEHABAD MOHAMMAD ، Khedmati Mohammad Reza ، FERDOWSI HOSSEIN ABADI OMID, "Ultimate strength of corroded stiffened box girder under pure bending,", 16th Marine Industries Conference, Dec 2014.

Khedmati Mohammad Reza ، SHOMALI VARZANDE MOJTABA ، SAYEHBANI MESBAH, "INVESTIGATING THE CORROSION DEFECTS ON STRENGTH OF SANDWICH PANELS COMPOSITE WITH FINITE ELEMENT METHOD,", 16th MARINE INDUSTRIES CONFERENCE, Dec 2014.

FERDOWSI HOSSEIN ABADI OMID ، MORSHEDSOLOUK FATTANEH ، Khedmati Mohammad Reza, "Comparison of different models and methods for cost estimation in ship design process,", 16th Marine Industries Conference, Dec 2014.

RASHIDI MAJID ، Khedmati Mohammad Reza ، ESFANDIARI AKBAR ، NAZARI MASOUD, "Study of effect of thickness on the ultimate strength of a multiplanar tubular joint with corrosion,", The 11th International Conference on Coasts, Ports and Marine Structures, Nov 2014.

BAHMYARI EHSAN ، Khedmati Mohammad Reza ، Khosrow Ghavami, "Stochastic bending analysis of thin plates on elastic foundation using generalized polynomial chaos and element free galerkin method,", The 7th International Conference on Thin-Walled Structures, Sep 2014.

Sepeh Rezapoor ، Khedmati Mohammad Reza ، Khosrow Ghavami, "Modeling and Analysis of Bamboo Space Structures using Finite Element Method,", The 4th National Conference on Spatial Structures, May 2014.

Sepehr Rezapoor ، Khedmati Mohammad Reza, "FGM Finite Element Model for Determination of Stress Distribution in Bamboo Simple Support Connection,", First National Conference of Architecture, Civil engineering, Urban Evironment, May 2014.

DEHGHANIAN ALI ، Khedmati Mohammad Reza ، GHASSEMI HASSAN, "Investigation into the Effects of Initial Imperfections induced in VIP Manufacturing on the Strength of Composite Ship Hulls,", 15th Marine Industries Conference, Oct 2013.

BABAZADEH ASHKAN ، Khedmati Mohammad Reza, "Numerical Investigation into the Effects of Overlap Length on Mechanical Behaviour of Double-Lap Composite-Aluminium Adhesive Joint under Tensile Loading,", 15th Marine Industries Conference, Oct 2013.

FERDOWSI HOSSEIN ABADI OMID ، Khedmati Mohammad Reza, "Software for Modeling and Analysis of Monohull High Speed Crafts using Finite Element Method,", 15th Marine Industries Conference, Oct 2013.

ZEBARDAST MOSLEM ، Khedmati Mohammad Reza, "Investigation of Strength of Unstiffened Flat Plate subject to Penetration,", 15th Marine Industries Conference, Oct 2013.

Moslem Najafi ، AMIRIYAN YOSEF ، Khedmati Mohammad Reza, "Investigation of Buckling and Interlaminar Delamination in Composite Stiffened Plates usder Low Speed Impact,", 15th Marine Industries Conference, Oct 2013.

FARDI HASSAN ، Khedmati Mohammad Reza ، NAZARI MASOUD ، Fatemeh Bagheri, "Ultimate strength and deformation of the tubular members in offshore structures under impact load,", 15th Marine Industries Conference, Oct 2013.

DEHGHANIAN ALI ، Khedmati Mohammad Reza ، GHASSEMI HASSAN ، BABAZADEH ASHKAN, "Initial Imperfections during Manufacturing Composite Ship Hulls: Review Study,", 15th Marine Industries Conference, Oct 2013.

Khedmati Mohammad Reza ، Philippe Rigo ، Amrane, Amirouche ، NAZARI MASOUD, "ASSESSMENT OF FATIGUE RELIABILITY FOR JACKET-TYPE OFFSHORE PLATFORMS CONSIDERING DYNAMIC BEHAVOIR,", ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering OMAE 2013, Jun 2013.

KHABIR MOHSEN ، Khedmati Mohammad Reza ، PEDRAM MASOUD ، FADAVIE MANOUCHEHR, "Investigation into Hydroelasticity of Water Impact on Offshore Structures; theories and applications,", 5th Offshore Industrial Conference, May 2013.

NAZARI MASOUD ، Abbas Rajabi ، Khedmati Mohammad Reza, "The methodology of fatigue reliability assessment for marine structures and a case study,", 5th Offshore Industries Conference, May 2013.

MALEKI DARIUSH ، NAZARI MASOOD ، Khedmati Mohammad Reza, "Nonlinear Analysis and Analytical Derivation of Ultimate Strength of Multiplanar XX Tubular Joints,", 14th Marine Industries Conference (MIC2012), Dec 2012.

OMIDALI MAHDI ، Khedmati Mohammad Reza ، HADIPOURGODARZI ROHALLAH, "Numerical Analysis of New Method of Adhesive Joint between Aluminium and Sandwich Panels,", 14th Marine Industries Conference (MIC2012), Dec 2012.

TAFI KOROSH ، NAZARI MASOOD ، Khedmati Mohammad Reza, "Investigation into the Nonlinear Buckling of Jackup Legs,", 14th Marine Industries Conference (MIC2012), Dec 2012.

MOHAMMADI MOHSEN ، AKBARI VAKIL ABADI KARIM ، Khedmati Mohammad Reza, "Estimation and Investigation into the Hydrodynamic Loads on a Trimaran Vessel under Intact and Damaged Conditions,", 14th Marine Industries Conference (MIC2012), Dec 2012.

Khedmati Mohammad Reza ، DEHGHANI TAFTI MOHSEN, "Calculation of Buckling Load for a Double Skin Structure with the aid of Orthotropic Plate Approach and Comparison of Results with the Results of Finite Element Method and Experiment,", 14th Marine Industries Conference (MIC2012), Dec 2012.

BAHRAMI ATAABADI POURIA ، Khedmati Mohammad Reza ، FADAVIE MANOUCHEHR, "Determination of equivalent orthotropic parameters of parabolic stiffened curved shell,", 14th Marine Industries Conference, Dec 2012.

MOHAMMADI MOHSEN ، Khedmati Mohammad Reza ، AKBARI VAKIL ABADI KARIM, "Stability Performance Analysis of a Wave Piercing Trimaran in Intact and Damaged Conditions,", 14th Marine Industries Conference (MIC2012), Dec 2012.

ZEBARDAST MOSLEM ، MORSHEDSOLOUK FATTANEH ، Khedmati Mohammad Reza, "Progressive Collapse Analysis of Composite Plates Stiffened with Hat-type Stiffeners under Longitudinal Compression,", 14th Marine Industries Conference (MIC2012), Dec 2012.

BAHRAMI ATAABADI POURIA ، ESLAMI MOHSEN ، Khedmati Mohammad Reza ، Mostafa Bahrami, "free vibration analysis of parabolic stiffened shell by using finite element B-spline based,", 2nd International Conference on Acoustics and Vibration, Dec 2012.

Khedmati Mohammad Reza ، DRHGHANI TAFTI MOHSEN, "Calculation of Buckling Load for a Double Skin Structure with the aid of Orthotropic Plate Approach and Comparison of Results with the Results of Finite Element Method and Experiment,", 14th Marine Industries Conference (MIC2012) iran, Dec 2012.

Khedmati Mohammad Reza ، NAZARI MASOUD ، KHALAJ AMIRFOAD, "Effect of corrosion on load carrying capacity and buckling behavior of locally corroded offshore tubular members,", The 10th International Conference on Coasts, Ports and Marine Structures (ICOPMAS 2012), Nov 2012.

MOBASHERI ZAFARABADI MOHAMMAD MEHDI ، Khedmati Mohammad Reza ، EDALAT PEDRAM, "Free vibration parametric study and derivation of empirical formula for estimating the first five natural frequencies of unstiffened shells with parabolic curvature,", 1st International Conference on Acoustics and Vibration, Dec 2011.

BABAZADEH ASHKAN ، Khedmati Mohammad Reza ، FADAVIE MANOUCHEHR, "Rubber tensile test,", MIC2011, Nov 2011.

PEDRAM MASOUD ، Khedmati Mohammad Reza ، KABOODVANDY RAD MODJTABA ، FADAVIE MANOUCHEHR, "hnvestigation of the effect of initial imperfection of on ultimate strength of aluminium panels under longitudinal and transverse pressure,", 13th Marine Industries Conference (MIC2011), Nov 2011.

Khedmati Mohammad Reza ، PEDRAM MASOUD ، FADAVIE MANOUCHEHR ، ali reza pedram, "Investigation of the effect of initial imperfection on ultimate strength of Aluminium panels under longitudinal compressions um,", 13th Marine industries conference (MIC2011), Nov 2011.

MOBASHERI ZAFARABADI MOHAMMAD MEHDI ، Khedmati Mohammad Reza ، EDALAT PEDRAM ، FADAVIE MANOUCHEHR, "Investigation of effect of Parametere on free vibration of reinforce cylinder with hyperbolic bend,", 13th Marine Industries conference (MIC2011), Nov 2011.

AMIRIYAN YOSEF ، Khedmati Mohammad Reza ، MORSHEDSOLOUK FATTANEH, "Study of the post-buckling and failure of stiffened composite panels using the numerical method and death of laminates,", 13th marine industry conference, Nov 2011.

MORSHEDSOLOUK FATTANEH ، Khedmati Mohammad Reza ، VATANDOST KHALILABAD MOHAMMADHOSSIN, "Reliability analysis of the SPD12 fixed platform,", 13th marine industry conference, Nov 2011.

MEMARIAN HAMID REZA ، Khedmati Mohammad Reza ، Mohammad Reza Zareei, "Analysis of stiffened aluminium plates under combined bi-axial compression and lateral pressure and derivation of the ultimate strength formula,", 13th marine industry conference, Nov 2011.

SADEGHI MOHAMMAD HOSSEIN ، Khedmati Mohammad Reza ، FADAVIE MANOUCHEHR, "Gun wave blast load modeling,", 11th marine industries conference, Nov 2011.

MOHAMMADI MOHSEN ، OMIDALI MAHDI ، Khedmati Mohammad Reza ، Mohammad Reza Zareei, "Investigation into the effects of torsional moment on a composite catamaran using Finite Element Method,", 13th marine industry conference, Nov 2011.

AMIRIYAN YOSEF ، Khedmati Mohammad Reza ، MORSHEDSOLOUK FATTANEH, "Investigation of the affecting parameters on the post-buckling behaviour and progressive failure of composite plates with hat-type stiffeners,", 13th marine industry conference, Nov 2011.

BEYGI HARCHEGANI ALI ، Khedmati Mohammad Reza ، EDALAT PEDRAM ، FADAVIE MANOUCHEHR, "Investigation of the crack effect on natural frequency of Vibrated plate,", 13th Marine industries conference (MIC2011), Nov 2011.

PEDRAM MASOUD ، Khedmati Mohammad Reza, "studying the effect of slamming on stiffened aluminum panel,considering initial imperfections,", 13th marine industry conference, Nov 2011.

Khedmati Mohammad Reza ، AKBARI VAKIL ABADI KARIM, "Structural similarity laws for testing marine vehicle models,", 13th marine industry conference, Nov 2011.

Khedmati Mohammad Reza ، KETABDARI MOHAMMAD JAVAD ، Navid Mohammadipour ، Hamid Arabzadeh, "The behavior of reinforced concrete slabs due to explosion waves,", The first national congress of Structure - Earthquake-Geotechnics, Dec 2010.

Khedmati Mohammad Reza ، BEYGI HARCHEGANI ALI ، EDALAT PEDRAM, "Investigations into Free Vibration of Plates and Effects of Crack on it,", Marine Industries Conference 2010, Oct 2010.

RASHEDI AHMADREZA ، Khedmati Mohammad Reza ، JAFAR ZADEH SEPIDEH ، NOURI ZORAREH, "Progressive Collapse Analysis of Nishihara Box Models,", Marine Industries Conference 2010, Oct 2010.

JAFAR ZADEH SEPIDEH ، Khedmati Mohammad Reza ، RASHEDI AHMADREZA ، NOURI ZORAREH, "Ultimate Strength Calculations and Derivation of Progressive Collapse Modes for a Box Girder Model,", Marine Industries Conference 2010, Oct 2010.

MORSHEDSOLOUK FATTANEH ، Khedmati Mohammad Reza ، NIKOYI SAEEID, "Parametric Study of Mid-Length Superstructures on Longitudinal Strength of Ships,", Marine Industries Conference 2010, Oct 2010.

MEMARIAN HAMID REZA ، Khedmati Mohammad Reza ، Mohammad Reza Zareei, "Ultimate Strength Analysis of Stiffened Aluminium Plates under Combined Transverse Compression and Lateral Pressure,", Marine Industries Conference 2010, Oct 2010.

SADEGHI MOHAMMAD HOSSEIN ، Khedmati Mohammad Reza ، FAKORI MEHDI ، REZAYI SANGTAYI MOHAMMAD, "Finite Element Analysis of Aluminium Ships Decks subjected to Gun Blast Loads,", Marine Industries Conference 2010, Oct 2010.

PEDRAM MASOUD ، Khedmati Mohammad Reza, "Determination of Load Distribution and Evaluation of Structural Response of Ships under Slamming Induced Impacts: A Review,", Marine Industries Conference 2010, Oct 2010.

JAFARPOUR HAMEDANI SHAHED ، Khedmati Mohammad Reza, "Review of Optimization Methods for Ship Structural Arrangements,", Marine Industries Conference 2010, Oct 2010.

A. Mohammad Rahimi ، Khedmati Mohammad Reza, "Elastic Analysis of Plate Grillages in Ship Structures by Numerical Methods,", Oct 2010.

MOBASHERI ZAFARABADI MOHAMMAD MEHDI ، Khedmati Mohammad Reza ، EDALAT PEDRAM, "Investigations into the Effects of Parabolic Curvature on Natural Frequencies of Unstiffened Plates applied in Ship Hull Structures,", Marine Industries Conference 2010, Oct 2010.

JAFARPOUR HAMEDANI SHAHED ، Khedmati Mohammad Reza, "Vibration of Stiffened Shells: A Review Study,", Marine Industries Conference 2010, Oct 2010.

Khedmati Mohammad Reza ، ROSHANALI MOHAMMAD MEHDI, "A proposal on effective thickness for strength evaluation of corroded steel plates under in plane compression,", Nov 2009.

ROSHANALI MOHAMMAD MEHDI ، Khedmati Mohammad Reza, "Computation of ultimate compressive strength of plate with two side randomly distributed corrosion wastage,", Nov 2009.

Khedmati Mohammad Reza, "Strength characteristics of two side corroded steel plates subjected to in plane compression,", Nov 2009.

ABSHENAS SAEIDEH ، SARLAK CHIVAEE HAMID ، Hassan Sayyadi ، Khedmati Mohammad Reza ، SAYEHBANI MESBAH, "gautomation nesting and cutting in marine industry with help of modifying similuated annealing,", first international industrial automation, Oct 2009.

NAZARI MASOOD ، Khedmati Mohammad Reza, "Assessment of ultimate strength and deformation characteristics off pre loaded tubular members under lateral impact loads,", May 2009.

NAZARI MASOOD ، Khedmati Mohammad Reza, "Assessment of compressive strength and buckling behavior of locally correded tubular members,", May 2009.

GHAFARI MOJTABA ، Khedmati Mohammad Reza, "Numerical analysis of fluid-struction interaction in green sea,", The 8th International Conference on Coasts, Ports and Marine Structures, Nov 2008.

Khedmati Mohammad Reza ، EDALAT PEDRAM ،, "A Numerical investigation into the effects of parabolic curvature on the buckling strength of deck stiffened plates,", Sep 2008.

Khedmati Mohammad Reza ، EDALAT PEDRAM ،, "Buckling collapse behaviour of cylindrical shells in blige region of ship hull girders under inplane compression,", Sep 2008.

Khedmati Mohammad Reza ، EDALAT PEDRAM ، Mehran Rastani, "A numerical investigation into the effects of parabolic curvature on the buckling strength of deck stiffened plates,", the 36th solid mechanics conference, Sep 2008.

Khedmati Mohammad Reza, "buckling collapse behaviour of cylindrical shells in bilge region of ship hull girders under inplane compression,", Sep 2008.

GHAFARI MOJTABA ، Khedmati Mohammad Reza ، Ghiasi Mahmoud, "Investigation into fluid-structure impact considering damping effect of speed and structural flexibility,", 16th Annual (International) Conference on Mechanical Engineering, May 2008.

Khedmati Mohammad Reza, "Buckling and Ultimate Strength Characteristics of Aluminium Stiffened Panels with Different Fixed/Floating Frames,", Dec 2007.

Khedmati Mohammad Reza, "A Numerical Study on the Ultimate Compressive Strength of Damaged Plate between Stiffeners,", Oct 2007.

Khedmati Mohammad Reza ،, "A Study on the Ultimate Strength of a Tanker under Different Combinations of Vertical and Horizontal Bending Moments,", Oct 2007.

Khedmati Mohammad Reza, "Buckling elastoplastic collapse analysis of corroded steel plates under in plane longitudinal compression,", Jul 2007.

100

Khedmati Mohammad Reza, "Direct stress analysis of high strength aluminium alloy deck structures subject to high speed impact loads,", Jul 2007.

101

Khedmati Mohammad Reza, "Post buckling behaviour of high strength aluminium alloy stiffened plates subjected to combined in plane compression and lateral pressure up to collapse,", Jul 2007.

102

Khedmati Mohammad Reza, "Crushing Characteristics of Aluminium High Speed Crafts at the Event of Inclined Bow Collisions,", Jun 2007.

103

Khedmati Mohammad Reza, "A Multi-Criteria Comparative Study on Ultimate Strength Formulations for Axially Loaded Stiffened Plates,", Jun 2007.

104

Khedmati Mohammad Reza ، NIKFARJAM MOOUD, "Gun blast load modelling and structural respons analysis of stuffened plate structures,", May 2007.

105

، Khedmati Mohammad Reza, "Analysis of lateral pressure effects on the Post-buckling behaviour of axially loaded stiffened aluminuim plates,", May 2007.

106

، Khedmati Mohammad Reza, "Sensitivity analysis on the buckling stringth of externally loaded stringer stiffened cylindrical shells,", May 2007.

107

NIKFARJAM MOOUD ، Khedmati Mohammad Reza, "Numerical strength analysis of unstiffened/stiffened ship plates under military Blast loads,", Oct 2006.

108

Khedmati Mohammad Reza ، KAIVANFAR IRAJ ،, "Progressive crushing analysis of aluminium high speed crafts with particular reference to bow collisions: numerical investigation,", Oct 2006.

109

Khedmati Mohammad Reza, "Ultimate compressive strength of plate elements with randomly distributed corrosion wastage,", Aug 2006.

110

Khedmati Mohammad Reza, "Parametric instability analysis on stringer stiffened circular cylindrical shells under axial compression/external hydrostatic pressure,", Aug 2006.

111

Khedmati Mohammad Reza ، ، ZAREEI MOHAMMAD REZA, "Sensitivity analysis on ultimate strength of stiffened aluminium plates under combined in-plane compression and lateral pressure,", Jun 2006.

112

Khedmati Mohammad Reza, "Nonlinear elastoplastic behaviour of intermittently welded stiffened plates under inplane compression,", Jun 2006.

113

، Khedmati Mohammad Reza, "Numerical study on ultimate strength and behaviour of plate girders under shear,", May 2006.

114

Khedmati Mohammad Reza, "A new design equation for estimation of the ultimate compressive strength of aluminum welded panels,", May 2006.

115

Khedmati Mohammad Reza, ". Application of advanced iwum plate elements in collapse strength analysis of ship hull plates,", May 2006.

116

، Khedmati Mohammad Reza, "Collapse behaviour of sttiffned plates in compression: experimental investigations versus finite element simulations,", Oct 2005.

117

، Khedmati Mohammad Reza, "Numerical and experimental investigations on the compression behaviour of stiffened plates,", Jun 2005.

118

Khedmati Mohammad Reza, "Recent advence in the application of finite element method in marine structural design,", May 2005.

119

Khedmati Mohammad Reza ، ESMAILY MOHAMMAD, "New aluminum welding techno logies for manu facturing of ltigh speed crafts,", Apr 2005.

120

Khedmati Mohammad Reza ، BARZEGAR BARGAHI ABDOLLAH, "Modelling longitudinally stiffenced plates for nonlinear elastoplastic response analysis,", Apr 2005.

121

Khedmati Mohammad Reza ،, "Ballast water exchange prodcedures problems and regulations,", Dec 2004.

122

Khedmati Mohammad Reza, "Prevention of oil pollution in the event of ship collision or grounding _ new directions for bunker tanks,", Dec 2004.

123

Khedmati Mohammad Reza ، ABPLFAZLI OLFAT, "Simulation of Average Stress _ Average Strain Relationships of Continuous plates Subjected to combined Biaxial Compression and lateral pressore .,", Jun 2004.

124

Khedmati Mohammad Reza, "Fabrication _ related initial imperfections in large steel plated structures,", May 2004.

125

Khedmati Mohammad Reza, "Effect of aspect ratio.hole shape and size on the elastic buckling behaviour of uniaxially loaded plastes with central holes,", May 2003.

126

Khedmati Mohammad Reza, "The effect of lateral pressure on the bucking/plastic collapse behaviour and strength of continuous stiffened plastes subject to biaxial compression,", Feb 2003.

127

Khedmati Mohammad Reza, "A parametric study of the buckling/plastic collapse behaviour and strength of continus stiffened plates under combined biaxial compression and lateral pressure,", May 2002.

128

Khedmati Mohammad Reza, "Some considerations on welding-induced imperfections for buckling/plastic collapse analysis of ship structural members and systems,", Mar 2002.

129

Khedmati Mohammad Reza, "Nonlinear Analysis of Continuous Plates Subjected to Combined Biaxial Compression and Lateral Pressure Based on Analytical Methods,", Feb 2001.

130

Khedmati Mohammad Reza, "An analysis of torsion in open ships,", Mar 1995.

Taught Courses

Course title

Description

Headlines

Date

Design of Ship Structures

4051

Finite Element Method & Advanced Numerical Analysis

آشنایی با روش اجزای محدود و محاسبات عددی پیشرفته

4042

Ship Structures (I)

مطالعه اجزای ساختمان کشتی و ویژگی های آنها

4042

Design of Ship Structures

4041

Ship Structures (I)

4032

Finite Element Method & Advanced Numerical Analysis

4032